Motorcycle Handlebar Lock (BHH/SHH)

Motorcycle Handlebar Lock (BHH/SHH) Business Ads

3 months ago - Motorbikes & Scooters   -  Khilgaon 


  • img
  • img
  • img
  • img
  • img
  • img
  • img
  • img
Ads Details

Motorcycle Handlebar Lock (BHH/SHH)

Code: HG-316

হাই কোয়ালিটি ম্যাটেরিয়ালে প্রস্তুত
শক্ত, মজবুত এবং দীর্ঘস্থায়ী
এটি ফ্রন্ট ব্রেকের লিভারকে হ্যান্ডেলবারের সাথে আটকে রাখে, ফলে আপনার বাইকের সরে যাওয়ার সম্ভাবনা কমে যায়
সহজেই ব্যবহার করা যায়
ব্র্যান্ড নিউ প্রোডাক্ট
টুইস্ট গ্রিপ সাইজ ফ্রম ২৭-৩৮ মিমি

This Caps Lock has been designed as an easy to use, highly visible, theft deterrent for all scooters,
motorcycles and ATVs. Caps Lock works by locking the front brake lever to the handlebar,
preventing the vehicle from being pushed away.

Main Features:
100% brand new and high quality
Simple to use, highly visible, easy to use
Designed as strong enough and light in weight
Built-in stainless steel wire, difficult to cut with a saw
Widely used for all scooters, motorcycles and ATVs
Stops embarrassing falls - Unlike disc locks, you can't forget it's in place, no bending, no disc dirt or street grime.
Key not required to lock.
Twist grip sizes from 27-38mm

Used on the front brake lever will keep the bike from being pushed off the centre or side stand
Used on the rear brake lever will hold the back tyre from spinning allowing for the loosening or re-torquing of the clutch nut when doing belt,
clutch and variator maintenance

Color: Yellow / Red/ Green/ Black/ blue/orange
Material: Micro Fiber and built-in stainless steel wire

Package Includes:
1 x Handlebar Grip Lock
2 x Key
4 x Pushing Part

Fitting Your Caps Lock:
Remove Caps-Lock from packaging, ensure the keys are seperated and the spare key is kept in a safe place.
Open Caps-Lock and install appropriate sized pushing part to snuggly grip the throttle. Once you have chosen the correct pushing part you may choose to glue them in place
Click the lever retainer forwards or backwards by pushing at the base of it to adjust the lever setting. Caps-Lock can be installed with no pressure on the brake arm, this still immobilises the twist grip. If chosen to engag

Semiller Ads